Double Glazing Seal Repairs
When double-glazed window seals fail this can lead to damp and mould. This can cause damage to the frame and wall surrounding it and can affect your health.
Fortunately, resealing is a more cost-effective way to fix most uPVC window frames than replacing them. A glazier is usually able to clean the frame of the window and the glass and then apply a new layer of sealant, and smooth it.
Water Leaks
Window seals are made to keep moisture out of your home. When they start to wear out, water may get into your windows. Not only is a leaky window annoying but it can also cause costly damage to your home's structure. It is important to identify the issue early and get it repaired by an expert before it gets worse.
The source of leaking windows can be found in the glass itself but on the frame or sill. This is the most frequent indication of a failed seal. It can be caused by damage to the window seal from weather or aging, worn out caulking or even an obstruction in the drainage area resulting in the accumulation of ice or water.
Another common sign of a failing window seal is water appearing between the panes of your double-glazed windows. This is not as dangerous as a water leak, because the water does not travel as far to get into your home. However, it could mean that the inert gas that is sandwiched between the panes of glass has leaked out which will reduce the insulating value of your windows.
Condensation between the panes is another typical sign of a failed seal. This could be due to a failed window seal, or it could be the result of an unforgiving climate in your home or a problem with the glass. The condensation may not only be irritating but it can also cause the development of mildew and mould within your home, which is very difficult and costly to get rid of.
It's time to inspect your double-glazed windows if see these signs. The repair or replacement of windows will safeguard your home from water leaks, lower costs for energy, and also reduce draughts. It's a small cost to provide your family with comfort and safety. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our experienced professionals are happy to help! We serve homeowners in the Mid-Atlantic.
Condensation
A damaged double-glazing seal could let water in the space that is used for insulation. This can lead to fogging or misting to the window panes.
When you notice condensation forming within your home, it's the perfect time to contact a professional double glazing repair service. The condensation is a sign that the seal created by the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by a number of causes, but most commonly by gaskets, sealants or insulation in the uPVC frames of the windows. As a result there are different double glazing seal repair options, but it is essential that the new seal is correctly measured to ensure the perfect fit and water-tight seal.
Gaskets are usually composed of polyurethane, which is a material that could be used to close gaps between double-glazed units. They are designed to last a long time but they can perish as time passes due to natural wear and tear, as well as exposure to different temperatures and weather conditions throughout the year.
As time passes, the foam can shrink or crack and this causes a break in the seal that allows moisture to enter the double-glazed windows. This not only creates condensation, but can also result in a loss of energy efficiency, meaning that you're losing heat from your home to the outside air.
Re-sealing the windows is one way to fix this problem. But, this isn't 100% guaranteed to fix the issue as it may only eliminate the condensation that has formed, but will not address the root problems that are causing your double-glazed windows to leak or to form condensation.
A professional who offers an insurance-backed warranty should replace your windows in full. If the company fails, you are still protected by insurance. It's important to know that replacement windows must be covered by a warranty of at least 10 years.
Misting
Verify that your double-glazing seals are in good working order as autumn approaches. Window seals that are worn out can affect the properties of your windows' insulation as well as cause dampness, mold and condensation. It is essential to address any problems with your double glazed windows as quickly as you can to avoid further damage and save money on energy bills.
A typical double-glazed window is constructed from two glass panes joined by an internal space that's filled with gas. A layer of sealant on the outside fills in the gap between the uPVC frame and the glass. This is crucial to maintaining the airtight seal that keeps warm and cold air from your home, saving you the cost of heating. These seals can become damaged as time passes because of weather conditions, ageing or poor installation. After this the magic formula for insulation that makes double glazed windows so effective could begin to lose its effectiveness.
If damaged or faulty seals are not fixed they can cause dampness and condensation, which could affect your health as well as the appearance of your window. Mold and damp not only causes damage to your floors, walls and ceilings but can also cause allergens and irritants in your home that can cause harm to you and your family's health.
The most common problem with double glazing is the misting between the panes. This happens when moisture gets into that insulated section of your window. It is difficult to fix without expert help with repair of your seal.
DIY solutions to this issue are available, however we recommend against them because they can be messy and damage your windows. These methods involve drilling holes in the glass units and applying chemicals to get rid of the condensation and fog. This can cause a number issues, including exposure of your windows and units to water damage.
Professional glaziers have the equipment as well as the skills and experience to properly reseal uPVC frames. They can also offer you long-lasting results. In addition, they can also offer suggestions on the best way to keep your uPVC windows in good shape to avoid future issues.
Draughts
A draft coming from your window is an indication that the sealant has probably failed and must be repaired or replaced. This will prevent cold air from getting into your home. It will also increase efficiency in energy use, decrease heating bills, and increase the comfort of your home.
It is important to keep in mind that not all draughts come from the window seals themselves but rather from the gap between the frame and the bricks. In certain cases, it can be possible to fix this by filling the gap with silicone caulking. If this does not work, you will require the seal to be professionally resealed.
When the sealant around the double-glazed window begins to break down and allow water ingress and can cause dampness or even mold in some instances. This could affect health, and cause damage to property. If you find any issues with water intrusion it is important to take action as soon as possible. If your windows are covered by a guarantee you should see if the company that sold them will cover the cost.
The windows themselves are typically covered by a warranty that can be at least 10 years, but some businesses offer lifetime warranties - therefore it is worthwhile looking into this information. If your double-glazed windows fall under warranty, you must contact the company that sold them as soon as you can and inform them about any issues you're experiencing. Ideally, it is best to make this contact in person or via mail or email, to ensure that everything is documented and clear.
It is also important to remember that draughts are often caused by faulty hinges, rather than an ineffective seal. The hinges are responsible for closing the window sash (the section that you open) but can become stiffer over time if they are not regularly oiled. This could cause a gap be created between the sash frame and the sash, which lets cold air to enter the house. This issue can be resolved by replacing the hinges, without impacting window seals.